Home Theater Calibration

Home Theater Calibration

You’ll want to purchase a home theater calibration disc to conduct your home theater calibration. These discs are typically available for less than $50. You should calibrate your video first and then your audio. The settings on your new television are far from optimal, usually incredibly bright, creating a state that many enthusiasts call torch mode. RPTVs are especially known for being horribly calibrated from the factory.

Rear projection and CRT tube-based televisions both greatly benefit from proper brightness, contrast, and color settings. RPTVs also greatly benefit from basic alignment of the three color guns. The basic process for calibrating the settings on television sets doesn’t differ between the display types, but rear projection sets require additional steps to ensure optimum picture quality during the home theater calibration process.

Home Theater Calibration DVD

When you do your home theater calibration, you’ll want to pay particularly close attention to your video monitor calibration. A poorly calibrated monitor doesn’t just give you a poor picture. It might also permanently damage your screen. With calibration, you can make your budget video monitor look and sound better than a more expensive system that has not been properly calibrated.

You’ll want to adjust the brightness level of your television first. Brightness is the level of black in the picture. The lower the brightness setting, the more black is in the picture. The higher the brighness setting the more white is in the picture.

Home Theater Speaker Calibration

When you do your home theater calibration, you’ll then want to adjust the contrast level on your television. The contrast is the level of white in the picture. A high contrast level makes a picture look washed out and the details on white objects are unable to be seen. Then a low contrast level does the same for dark objects. Next when you’re doing your home theater calibration, you’ll want to adjust the color settings. You want to make sure that green grass is green and that a white face is not red. Many televisions come from the factory set to display one color more predominantly than others.

Next, you’ll want to adjust the tint settings on your television. While brightness and contrast affect each other, color and tint settings also interact. When the tint settings are too high or too low, the picture appears too red or too green. The proper setting should be in between these two points, where things look the most natural.